DECC has recently published a paper on amendments being made to the Domestic Renewable Heat Incentive scheme. One of the key changes is the removal of the requirement to have a Green Deal Assessment. The paper states:
‘Currently we require applicants to the domestic RHI to have a Green Deal Assessment (GDA). This is to provide them with information about the efficiency measures that are suitable for their homes. This initially applied to all applicants but Registered Social Landlords were made exempt from this requirement in February 2015.
It was announced in July 2015 that there would be no further funding to the Green Deal Financing Company. This, alongside consistent feedback that a GDA is an unnecessary burden to scheme participants, has resulted in us changing the Regulations by removing the need for a GDA as an eligibility requirement for the Domestic RHI. Applicants will still need to meet minimum insulation requirements of loft and cavity wall insulation and provide a valid EPC that is no more than 24 months old’.
These changes come into force on 24th March 2016.
The recent UK Budget has reinforced the government’s commitment to sticking with its target of achieving zero carbon homes by 2016 (Paragraph – 1.109). They also announced a response will be given to the energy efficiency requirements in buildings regulations ‘Part L’ by May 2013.
However, the government’s overall goal to achieve zero carbon may provide challenging as it has already missed its own target to provide a revised document Part L by April 2013, which, would have given the industry six months to prepare for the changes. This has caused confusion if to weather the announcement in May will also be enforced in October or if another consultation will be required after May.
Overall, for the government to achieve its target ministers need to decide swiftly.
Whilst preforming air pressure tests and extractor fan tests we get asked ‘Why do I need to achieve a low air leakage test result but ensure they the property is ventilated right’. Traditionally, many of the UK housing stock rely on ventilation through air leakages, which, is uncontrollable to the occupants. In addition, ventilation through air leakages will not ensure the correct ventilation of a property as it could have excessive ventilation or under ventilation rates; both can cause an increase in energy consumption and the build-up of pollutants.
Therefore, each dwelling must be compliant with Building Regulations Part F to ensure the correct number of background ventilation is provided and to ensure extractor fan units achieve the minimum flow rate, without relying on air leakage.
Book your extractor fan test and domestic air tightness test together and we can provide a reduction in price.
Mould and dampness are only a few side effects of the incorrectly specified extract system, however, to prevent this we now provide the testing of all purpose designed ventilation systems including trickle vents and cooker hoods to ensure compliance with building regulations part F. We are aware of pressures currently placed on both architects and builders to stay compliant with the numerous areas of building regulations and we are determined to make the process easy to understand and to provide specialist advice on how best achieve compliance for the current / future building regulation part F.
Top tips to achieve compliance
- At least one trickle vent per window or two for a double window etc.
- The shortest possible ductwork length
- Prevent blockage of the ductwork.
- The installation of modest / high power extracts.
- At least a 10mm undercut for each internal door.
- Don’t necessarily believe the flow rate provided by the manufacture.
- If you are uncertain about anything ring us!
Book your extract and air tightness test together and we provide a discounted price.
For more information on extract testing or the requirements regarding Building Regulation Part F please do not hesitate to contact us of 01476 870 504, contact email@example.com or visit the planning portal.
The below is an extract from the letter issued by DCLG today.
It has been brought to DCLG’s attention that some Domestic Energy Assessors (DEAs) have received correspondence containing the following, or similar, text:
“We have obtained your details from the National Database as we have an EPC job in your postcode area.
We have an EPC instruction for a property that is about to have Solar Panels installed.
The required procedure is as follows; You will be required to issue a draft EPC initially as if the Panels had been installed.
Please record the Roof Orientation, Roof Slope and Overshading The kWp figure will be supplied for you.
Following completion of the PV installation we will provide the MCS Certificate and a photograph of the panels in order for you to lodge the EPC.
Your invoice can be submitted for immediate payment following the initial survey. You will not be required to return to the property.”
The Department does not consider any EPC that has been produced in line with the instructions contained in this or similar correspondence to be compliant with the Scheme Operating Requirements as it appears to allow an EPC to be produced without a visit to a site where the presence of the PV panel can be verified by the EA. Schemes shall, with immediate effect, consider DEAs who are found to have produced EPCs in line with these instructions to have committed a serious breach of the Code of Conduct and shall take appropriate disciplinary action. This requirement shall not however be retrospective.
Schemes shall require DEAs to produce EPCs on the basis of the evidence about the physical characteristics of the building at the time that the visual inspection is carried out. Schemes shall ensure that any documentary evidence provided by DEAs about work that has been carried out in relation to the physical characteristics of the building only concerns work that was complete at the time of the visual inspection. Schemes shall not permit DEAs to use evidence that relates to work carried out after the visual inspection.
We appreciate that you may have received differing advice in the past but the message from DCLG is now clear.
It is important that you start complying with the above immediately, as failure to do so could result in a serious breach of the Code of Conduct and disciplinary action taken. we will be working to the above method with effect from the 28th June 2012.
The continual tightening of Building Regulations Part L since the early 2000’s is designed to push the UK’s new housing stock to zero-carbon by 2016. In April 2013 the latest set of Building Regulations are set to come into affect with a further tightening on carbon emissions, could create, several problems for builders and architects to achieve a pass during SAP process.
To help clients through this process there are a range of tools that the SAP assessors have at their dispense, from Air Source Heat Pumps, Secondary Heating or Solar Panels. However, these may not always be suitable options and could be costly solutions. The easiest and most cost effective solution is to arrange an air test with an accredited company who can easily guide you towards a low air test figure of 5. (For information on why a score of 5 please click here) The cost of an air test with a skilled air tester is likely to cost approx £200 depending on location and size of the property, against the cost of installing solar panels or secondary heating which potentially cost £1000+.
For more information on how to stay ahead of Building Regulation April 2013 and the chance to visit a free seminar with our Senior Air tester please continually visit our website, or follow us on Twitter.
October 2010 witnessed important alterations to Building Regulations Part L (Conservation of Fuel and Power) and Part F (Ventilation)
- Part L saw the target carbon dioxide emissions rate for new dwellings (TER) reduced by 25% meaning you may now require a low air tightness result to ensure dwellings pass building regulations
- The changes to Part F introduced new ventilation provisions if dwellings receive an air tightness test result of less than 5 m3/(h.m2) @ 50PA
The air tightness testing process now requires a minimum of three units of each identical type to be tested or 50% whichever is less. Currently builders can use a single air test certificate on multiple dwellings without the need to test them all. However, it is becoming more difficult for builders to apply this rule as the introduction of a penalty on those properties not tested. For example, if you require an air tightness figure of 6, and wanted to use a single air test on multiple properties, you would need to achieve a figure of 4 as you incur the 2 point penalty for the properties not tested. If you achieve an air test figure less than 5 there are specific requirements to satisfy building regulation Part F (Ventilation)
For more information on the above please contact Ashby Energy
During 2012 DCLG plan to change the type and size of building that require DEC. These changes will result in more buildings requiring a mandatory Display Energy Certificate and Advisory Report. We will keep you updated on the changes and how it could effect you or your business.
The new and improved Energy Performance Certificate was a strong talking point at this week’s CLG meeting. Speakers at the seminar reported that currently the majority of home buyers/prospective tenants either do not read their EPC in detail or fail to read it at all. Reasons as to why this may be included the extensive use of technical jargon, large amounts of block text and a lack of information targeting potential savings.
After seeing an example of the new version of the EPC our overall opinion is that it is in fact a lot clearer in terms of its layout and content and by far more user friendly. There is also a much stronger emphasis on how to make you home more energy efficient, clearly indicating the savings that can be made over a 3 year period instead of just the one. Additionally the benefits of using the Green Deal in terms of financial savings are also emphasised. Click the link below to have a look the example of the draft certificate and let us know your opinion!
Click here to View the Latest Draft of the New EPC
With research indicating that the current domestic Energy Performance Certificate (EPC) is not always readily understood by the public, a series of improvements are to be made to the existing EPC in April 2012. The new document will have recommendations that could be funded through the green deal, which will be introduced in October 2012. There will also be a greater focus on potential financial savings in a more simple and clearer content.
More information as and when we receive it.